- 34 -
Check engine protective devices xx
Inspect starter motor xx
Inspect turbocharger xx
Inspect water pump xx
Inspect charging alternator xx
Inspection by Atlas Copco service technician xxx
Generators in stand-by application have to be tested on a regular basis. At least
once a month the engine should run for one hour. If possible a high load (> 30%)
should be applied so that the engine reaches its operating temperature.
Maintenance schedule Daily
50 hrs
after initial
start-up
Every 250
hours
Every 500
hours
Every 1000
hours
Yearly
Service pak
---
TBA* TBA*
-
To Next Page
Loading...
