- 56 -
6.1 Engine troubleshooting
Refer to the Engine Operation manual for engine
troubleshooting.
6.2 Solving controller alarms
6.2.1 General
If an alarm condition occurs, an icon is displayed in
the Alarm Icon section of the Lc1003™ LCD to
indicate the alarm that is current active on the
controller.
In the event of a warning alarm, the LCD only
displays the Alarm Icon.
In the event of an electrical trip or shutdown alarm,
the module displays the Alarm Icon and the STOP
button LED begins to flash.
If multiple alarms are active at the same time, the
Alarm Icon automatically cycles through all the
appropriate icons to indicate each alarm which is
active.
To Next Page
Loading...