QST42-20CT-T50-L134-H10 EN Product information
© Atlas Copco Industrial Technique AB - 9839 1166 01
5
■
CT - Straight Nutrunner
■
COT - Offset Nutrunner
■
CTV - Angle head Nutrunner
Service overview
Service recommendations
Preventive maintenance is recommended at regular intervals. See the detailed information on preventive
maintenance. If the product is not working properly, take it out of service and inspect it.
If no detailed information about preventive maintenance is included, follow these general guidelines:
■
Clean appropriate parts accurately
■
Replace any defective or worn parts
To Next Page
Loading...
