EasyManuals Logo

Atlas Copco STa 6000 User Manual

Atlas Copco STa 6000
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Introduction STa 6000 User Guide
20 (324) 9836 8243 01 Edition 3.1
IRC-B radio module (optional):
- Bluetooth: v4.0 (Bluetooth low energy and Classic Bluetooth)
- Frequencies:
FREQUENCY RANGE (MHz) EU USA
2402 ÷ 2480 YES YES
CENTER FREQUENCY (MHz) Max. E.I.R.P. (mW)
2402 0.37
2441 0.39
2480 0.47
- Throughout: 1.3 Mbps (Classic Bluetooth)
- Microprocessor capacity: 72 MHz, ARM 32-bit Cortex M3 processor with 64kB RAM and
384kB flash
ENVIRONMENTAL
The following conditions must be observed during operation:
Internal Use only
Environmental Class: II
IP Index according to EN IEC 60529: IP40
Room Temperature: 5 to 40°C
Atmospheric humidity: 95%, non-condensing
Altitude: Up to 2000m
SYSTEM REQUIREMENTS
The following are the PC minimum requirements for installation of STa 6000 Management Software
(ToolsTalk BLM):
Processor: 400 MHz (800 MHz or above recommended)
Memory: 256 Mb or above
Hard disk space: 610 Mb (1 Gb or above recommended)
Display: 800 x 600, 256 colors (1024 x 768, High Color (16-bit) recommended)
Operating Systems: Windows XP Service Pack 2 (SP2), Windows 7, Windows 8.1, Windows 10
Internet Explorer 5.01 or later (required for installation of the .NET Framework)
Windows Installer 3.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atlas Copco STa 6000 and is the answer not in the manual?

Atlas Copco STa 6000 Specifications

General IconGeneral
BrandAtlas Copco
ModelSTa 6000
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals