Atlas Copco STa 6000 User Manual

STa 6000 User Guide Introduction
9836 8243 01 Edition 3.1 15 (324)
1.2 Reference Documents
The following is a list of important documents useful for a complete view of the product in all its
applications:
 STa 6000 Safety Information (No. 9836 5229 01): Multilanguage safety instructions and declaration of
conformity
 ToolsTalk BLM registration procedure: How to register the software on the Atlas Copco website
 STa 6000 calibration procedure: Procedure to calibrate the STa 6000 (only for use of authorized
calibration centers)
 Installation guides for STa 6000 modules: Detailed installation instructions, delivered with each part
 IRTT-B, SRTT-B, MRTT-B and MRTT-C User Guides
 IRC-Connect User Guide (No. 9836 6340 01)
 Torque Supervisor User Guide (No. 9836 2866 01)
1.3 Specifications
TECHNICAL
 Torque range: The torque range is defined by the transducer connected to the STa 6000.
 Maximum accuracy error: ± 0.1 %.
 Maximum linearity error: ± 0.015 %.
 Angle measurement
 Results memory capacity: 50000 test results
 Traces memory capacity: 50000 traces (average duration: 30 s)
 Pset memory capacity: 1000 Psets (1 for STa 6000 Basic)
 Tools memory capacity: 1000 Tools (1 for STa 6000 Basic)
 Number representation for torque values:
Nominal Torque (T) Measured torque shown on display
T < 5
M 1 
three digits after decimal point
Measured torque < 1 
four digits after decimal point
5 < T  50
M 10 
two digits after decimal point
Measured torque < 10 
three digits after decimal point
50 < T  500
M 100 
one digits after decimal point
Measured torque < 100 
two digits after decimal point

Atlas Copco STa 6000 Specifications

General

Brand	Atlas Copco
Model	STa 6000
Category	Measuring Instruments
Language	English