Atlas Copco STa 6000 User Manual

STa 6000 User Guide Revision history
9836 8243 01 Edition 3.1 5 (324)
Edition Date Author Description
Reference
Minimum
Software version
(ToolsTalk BLM)
Reference
Firmware
version
Scanning barcodes with STa 6000
updated (par. 11.4), View one trace
updated (par. 13.1), Traces comparison
updated (par. 13.2), Copy, Print and
Export traces updated (par. 13.3), STa
6000 settings updated (par. 16), Controller
configuration updated (par. 16.1),
Information updated (par. 16.2), IRC-C
added (par. 16.4), SPC Rules updated
(par. 16.6), Memory updated (par. 16.7),
Working with IRC-Connect (and relative
sub-paragraphs) added (par. 18),
Troubleshooting Guide updated (par. 23)
3.1 14 June 2016 C. Pacente Specifications updated (par. 1.3), EC
Declaration of Conformity updated (par.
1.4), FCC Rules updated (par. 1.5),
Transducers updated (par. 5), Saving
Psets (from STa 6000 to PC) added (par.
7.3), PowerMACS calibration updated (par.
10.2), STa 6000 communication method
settings  Manual / Serial communication
(Mode 1 ÷ 50) added (par. 10.2.1), STa
6000 communication method settings 
Serial communication (Mode 0) added (par.
10.2.2), Identifier Prerequisites and Details
updated (par. 11.2)
9.1.x 3.1x
Copyright Atlas Copco Industrial Technique AB
NOTE: This manual may be altered without further notice.
For further information log on to the Atlas Copco website: www.atlascopco.com
NOTE:
The programming software (ToolsTalk BLM) may be updated with no changes about
the STa 6000 functionalities. The minimum software version indicated here is required for the
reference firmware version.
NOTE: In the event of conflicts between translations of this User Guide, always refer to the
official English version.

Atlas Copco STa 6000 Specifications

General

Brand	Atlas Copco
Model	STa 6000
Category	Measuring Instruments
Language	English