Atlas Copco STbench System Overview Manual

Introduction EN STbench
8
© Atlas Copco Industrial Technique AB - 9839 0879 01
Software version Change
04.01x
■
ISO 6789-2:2017 added (for more information, see "STbench with PC
Configuration Manual / STpad Configuration Manual").
■
Tool parameters updated (for more information, see "STbench with PC
Configuration Manual / STpad Configuration Manual").
■
Traceability tag updated (for more information, see "STbench with PC
Configuration Manual / STpad Configuration Manual").
■
Open Protocol added (for more information, see "STbench with PC Con-
figuration Manual / STpad Configuration Manual").
■
General manual update ("STbench with PC Configuration Manual /
STpad Configuration Manual").
■
Motorized cell added (for more information, see "STbench Operation
Manual").
■
Running a test on the Motorized Cell added (for more information, see
"STbench Operation Manual")
■
Power supply socket updated (for more information, see "STbench Op-
eration Manual").
■
General Safety information added (for more information, see "STbench
Operation Manual").
■
Charging the battery updated (for more information, see "STbench Op-
eration Manual").
■
Technical specifications updated (for more information, see "STbench
System Overview Manual").
04.00x
■
Route updated (for more information, see "STbench with PC Configura-
tion Manual / STpad Configuration Manual").
■
Results updated (for more information, see "STbench with PC Configu-
ration Manual / STpad Configuration Manual").
■
Summary category for SPC and ISO 6789 updated (for more informa-
tion, see "STbench with PC Configuration Manual / STpad Configuration
Manual").
■
Adding a visual check inspection updated (for more information, see
"STbench with PC Configuration Manual / STpad Configuration Man-
ual").
■
Adding a dimensional check updated (for more information, see
"STbench with PC Configuration Manual / STpad Configuration Man-
ual").
■
Connected transducers added (for more information, see "STbench with
PC Configuration Manual / STpad Configuration Manual").
■
Restore added (for more information, see "STbench with PC Configura-
tion Manual / STpad Configuration Manual").
■
Exporting log added (for more information, see "STbench with PC Con-
figuration Manual / STpad Configuration Manual").
■
Tool check testing updated (for more information, see "STbench with PC
Configuration Manual / STpad Configuration Manual").

Atlas Copco STbench Specifications

General

Brand	Atlas Copco
Model	STbench
Category	Test Equipment
Language	English