- 48 -
STOPPING
After pressing the Stop button the display will show: After cooling down the engine will stop and the
display will show
The engine is stopped, and the controller will do a
double check to see if the engine is really stopped.
SHUTDOWN
When the machine is shutdown due to a critical alarm
or an emergency stop the display will show
Active Buttons
Start Button
(to initiate Start command)
Measurement View Button
Settings View Button
Alarms View Button
Active Buttons
Start Button
(to initiate Start command)
Measurement View Button
Settings View Button
Alarms View Button
Active Buttons
Measurement View Button
Settings View Button
Alarms View Button
Enter Button
(to acknowledge the shown alarm)
To Next Page
Loading...
