I
NSTRUCTION
M
ANUAL
27
TECHNICAL SPECIFICATIONS
R
EADINGS
ON
GAUGES
T
ORQUE
VALUES
S
ETTINGS
OF
SWITCHES
AND
SAFETY
VALVE
O
UTLET
VALVE
SPECIFICATIONS
Gauge Reading Unit
Working pressure (WPG) Between unloading and working pressure bar
Fuel level (P1) Above 0 Fuel tank full
Engine oil pressure (P2) Above 2.5 bar
Hourmeter (P3) Adding up h
Engine coolant temp. (P4) Below 95 °C
Tachometer (P6) Between maximum load and no-load speed r/min
Assemblies Value
Wheel nuts
(1)
200 Nm
Bolts, frame/axles 205 Nm
Bolts, lifting eye/frame 205 Nm
Element to frame
Bolts, element/support 80 Nm
Bolts, support/buffer 205 Nm
Bolts, buffer/frame 80 Nm
Engine to frame
Bolts, support/buffer 205 Nm
Bolts, buffer/frame 80 Nm
Switch Makes at Brakes at
Shut-down switches
Engine coolant temperature (S14) – 105 °C
Engine oil pressure (S5) 1.14 0.8 bar(e)
Compressor element air outlet temperature (S7), adjusta-
ble up to
(2)
– 120 °C
Alarm switch
Air filter vacuum indicator switch (S10) – 35 mbar
Safety valve (SV)
Opening pressure – 16 bar(e)
Valve Value
Diameter valve 1 1 “
Diameter valve 2 2 “
To Next Page
Loading...
