Atlas Copco XAS 67 Dd C3 APP User Manual

- 77 -
CHANGING TYRES
When changing a tyre, please observe that the arrow
on the tyre in top position points in the driving
direction (towards the towbar).
STORAGE
Run the compressor regularly, e.g. twice a week, until
warm.
Load and unload the compressor a few times to
operate the unloading and regulating components.
Close the air outlet valves after stopping.
SERVICE PAKS
A Service Pak is a collection of parts to be used for a
specific maintenance measure.
It guarantees that all necessary parts are replaced at
the same time keeping down time to a minimum.
The order number of the Service Paks are listed in the
Atlas Copco Parts List (ASL).
SERVICE KITS
A Service Kit is a collection of parts to fit a specific
repair or rebuilding task.
It guarantees that all necessary parts are replaced at
the same time, which improves the uptime of the unit.
The order numbers of the Service Kits are listed in the
Atlas Copco Parts List (ASL).
COMPRESSOR ELEMENT OVERHAUL
When a compressor element is due for overhaul, it
needs to be done by Atlas Copco. This guarantees the
use of genuine parts and correct tools with care and
precision.
LIABILITY
The manufacturer does not accept any liability for any
damage arising from the use of non-original parts and
for modifications, additions or conversions made
without the manufacturer’s written approval.
If the compressor is going to be stored
without running regularly, protective
measures must be taken.
Contact Atlas Copco.

Atlas Copco XAS 67 Dd C3 APP Specifications

General

Brand	Atlas Copco
Model	XAS 67 Dd C3 APP
Category	Air Compressor
Language	English