- 15 -
Frame and axles
The compressor/engine unit is supported by rubber
buffers in the frame.
The standard compressor has an adjustable or fixed
towbar with brakes.
The braking system consists of an integrated parking
brake and overrunbrake. When driving backwards the
overrunbrake is not engaged automatically. (For
available options see chapter Available options.)
Bodywork
The bodywork has openings at the shaped front and
rear end for the intake and outlet of cooling air and
hinged doors for maintenance and service operations.
The bodywork is internally lined with sound-
absorbing material.
Lifting eye
A lifting eye is accessible when a small door at the top
of the unit is unlocked.
Control panel
The control panel grouping the air pressure gauge,
control switch etc., is placed at the left hand/ rear end
corner.
Data plate
The compressor is furnished with a data plate
showing the product code, the unit serial number and
the working pressure (see chapter Dataplate).
Serial number
The serial number (SN) is located on the right-hand
side towards the front on the upper edge of the frame.
To Next Page
Loading...
