Atlas Copco ZT37 User Manual

Instruction book
2920 1472 03 1
Atlas Copco Stationary Air Compressors
ZT15, ZT18, ZT22, ZT30, ZT37, ZT45
ZR30, ZR37, ZR45
Instruction book
Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium.
Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in
particular to trademarks, model denominations, part numbers and drawings.
This instruction book meets the requirements for instructions specified by the machinery directive
98/37/EC and is valid for CE as well as non-CE labelled machines
No. 2920 1472 03
Replaces 2920 1472 02
Registration code: APC Z<55 + VSD / 38 / 392
2004-05 www.atlascopco.com

Atlas Copco ZT37 Specifications

General

Brand	Atlas Copco
Model	ZT37
Category	Air Compressor
Language	English

Summary

1. Leading Particulars

1.1 General Description

Overview of ZT/ZR compressors, their oil-free air delivery, and enclosure.

1.6 Air Dryer on Full-Feature

1.7 Electrical System

1.8 Elektronikon Control System

Explains functions: automatic control, protection, service warnings, and automatic restart after voltage failure.

1.9 Control Panel

Describes the control panel layout, buttons, display, and indicator LEDs for compressor operation.

3. Operating Instructions

3.1 Initial Start-up

Guides through pre-start checks, regulator familiarization, and initial setup procedures.

3.2 Starting

Details the steps for starting the compressor, including voltage checks, oil level, and button operation.

3.3 During Operation

3.4 Stopping

Provides instructions for stopping the compressor, including normal and emergency procedures.

4. Maintenance

4.1 Preventive Maintenance Schedule

Outlines regular service operations and checks based on period or running hours.

5. Servicing Procedures

5.1 Air Filter Servicing

5.2 Oil and Oil Filter Change

5.3 Safety Valves

6. Problem Solving

6.1 Low Capacity or Pressure

Safety Precautions

General Safety Directions & Precautions

Emphasizes operator responsibility, authorized personnel, and compliance with local regulations.

Installation Safety Directives

Operation Safety

Covers safe practices for air hoses, air quality, flammable fumes, pressure limits, and noise protection.

Maintenance Safety

Outlines safety measures for maintenance, including using correct tools, genuine parts, and handling refrigerants.