Atlas Copco ZT22 User Manual

Instruction book
2920 1472 03 1
Atlas Copco Stationary Air Compressors
ZT15, ZT18, ZT22, ZT30, ZT37, ZT45
ZR30, ZR37, ZR45
Instruction book
Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium.
Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in
particular to trademarks, model denominations, part numbers and drawings.
This instruction book meets the requirements for instructions specified by the machinery directive
98/37/EC and is valid for CE as well as non-CE labelled machines
No. 2920 1472 03
Replaces 2920 1472 02
Registration code: APC Z<55 + VSD / 38 / 392
2004-05 www.atlascopco.com

Atlas Copco ZT22 Specifications

General

Model	ZT22
Type	Oil-free rotary screw compressor
Voltage	400 V
Frequency	50 Hz
Motor Power	22 kW
Noise Level	69 dB(A)

Summary

Product Overview and Features

Elektronikon Control System

Detailed explanation of the compressor's advanced control system functions.

Control Panel Overview

Installation Guidelines

Operating the Compressor

Initial Start-Up Procedure

Step-by-step guide for the first-time setup and initial operation.

Compressor Starting Procedure

Decommissioning and Removal

Compressor Maintenance

Preventive Maintenance Schedule

Outlines routine checks and service intervals to ensure longevity.

Servicing and Replacement Procedures

Oil and Filter Replacement

Safety Valve Testing and Importance

Guidance on testing and the importance of safety valves.

Troubleshooting Common Issues

Troubleshooting Guide

Common issues and their solutions, such as low pressure or high temperatures.

Technical Specifications and Data

Electrical Protection Settings

Compressor Technical Specifications

Technical data including operating limits and performance characteristics.

Pulsation Damper Usage Instructions

Pulsation Damper Safety and Use

Pressure Equipment Directive (PED) Compliance