Need help?Do you have a question about the Atlas Copco ZT-75 and is the answer not in the manual?
General| Type | Oil-free rotary screw compressor |
|---|---|
| Power | 75 kW |
| Working Pressure | 7.5 bar |
| Installed Motor Power | 75 kW |
| Drive Type | Direct Drive |
| Cooling Method | Water-cooled |
| Weight | 1820 - 2080 kg (4012 - 4586 lb) |
Guidelines for safe installation procedures and precautions.
Essential safety measures for operating the compressor safely.
Safety guidelines for performing maintenance and repair tasks.
Overview of the Elektronikon regulator and its primary functions.
Description of the control panel buttons and their functions.
Instructions on how to use the emergency stop button.
Overview of settings that can be modified.
Steps to modify various operational parameters.
Instructions for modifying shutdown and warning settings.
Lists and explains all programmable parameters and their ranges.
Step-by-step guide for the initial start-up procedure.
Checks and procedures to perform before starting the compressor.
Steps to start the compressor and verify its operation.
Guidance for normal compressor operation and monitoring.
Procedure for safely stopping the compressor.
Important safety warnings before performing maintenance.
Routine maintenance tasks and their recommended intervals.
Step-by-step guide for changing the oil and oil filter.
Lists common compressor faults and provides solutions.
To Next Page