LCR40 User Guide November 2021 – Rev 7
Page 3
Introduction
The Peak Atlas LCR40 is an advanced instrument that greatly simplifies the
testing of passive components.
Traditional LCR bridges can be inherently complex and very time consuming
to use.
The LCR40 does everything automatically, it tells you the component type in
addition to component value data.
What's more, the LCR40 automatically selects the best signal level and
frequency for the particular component under test.
The software is smart; all internal calculations are performed with floating
point maths. This means that precision isn't lost in the complex internal
calculations and all results are displayed in properly formatted and easy-to-
read engineering units, eg. 23.6pF.
Summary Features:
• Automatic component identification.
• Automatic test frequency selection (DC, 1kHz, 15kHz and
200kHz).
• Delayed or instant analysis (for hands free operation).
• Auto power-off.
• Probe and test lead compensation.
• Interchangeable probe sets using 2mm connectors.
• Automatic ranging and scaling.
• 1% basic accuracy for resistors.
• 1.5% basic accuracy for inductors and capacitors.
To Next Page
Loading...
Need help?
General
