5
INTRODUCTION
We thank you for purchasing one product included in our range of wheel-balancers.
The machine is manufactured exploiting the best of quality principles.
To ensure correct operation and long life of the machine, all you need to do is follow these simple instructions, which
shall be read and fully understood in every single part.
DETAILS OF THE WHEEL-BALANCERS
When contacting our Service Department or when requesting spare parts, please provide a complete description of the
Model of the tyre changer and its Serial Number.
For the sake of simplicity and commodity, the details of your tyre changer are written in the space below.
If the details given in this manual do not match those written on the nameplate of your tyre changer, those written on
the nameplate are the ones to be considered valid.
DETAILS OF THE MANUFACTURER:
- Consult the Declaration of conformity and the data nameplate (tted on the machine)
NAMEPLATE DATA
This manual is an integral part of the machine.
Before you use the tyre changer, read the warnings and instructions given in this manual carefully and thoroughly,
because they provide important information on safe use and maintenance.
Keep this manual with care for future consultation
NOTE: some of the illustrations shown in this manual have been taken from pictures of prototypes.
Consequently, some parts or components of the machines of standard production may differ from what is illustrated.
FAC-SIMILE
2018
230
: PWB50
93
0.65
To Next Page
Loading...
Need help?
General
