Need help?Do you have a question about the Atlona AT-HD4-SI40SR and is the answer not in the manual?
General| Category | Extender |
|---|---|
| Model | AT-HD4-SI40SR |
| Type | HDMI Extender |
| HDMI Bandwidth | 10.2 Gbps |
| Input Ports | 1 x HDMI |
| 3D Support | Yes |
| Connectors | HDMI, RJ45 |
| Power Supply | 5V DC |
| HDMI Version | 1.4 |
| Maximum Resolution | 4K @ 30Hz |
| Transmission Distance | 40 meters |
| Supported Audio Formats | Dolby Digital, DTS |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 20% to 90% (non-condensing) |
| Weight | 0.2 kg |
Details the front panel of the transmitting module, including MODE and HDMI IN connectors.
Details the rear panel of the transmitting module, including power and CAT5/6/7 OUT ports.
Details the front panel of the receiving module, including EQ control and HDMI OUT.
Details the rear panel of the receiving module, including power and CAT5/6/7 IN ports.
Defines the pinout for the HDMI connector on the device, listing TMDS data, clock, and DDC signals.
Details the pinout for the CAT5 RJ45 connector according to TIA/EIA-568-B wiring standards.
Key safety precautions to prevent electrical shock and ensure safe usage, including avoiding rain/moisture.
General precautions for installation, operation, and maintenance to ensure product longevity and prevent damage.
Details the scope of Atlona's limited product warranty for defects in materials and workmanship.
Specifies the duration of the warranty for new, refurbished products, and cables.
Outlines the process for obtaining warranty service, including contact and return procedures.
Lists conditions and damages that are explicitly not covered by the limited product warranty.
To Next Page
