Need help?Do you have a question about the Atlona AT-HD4-V40SRS and is the answer not in the manual?
General| Category | Extender |
|---|---|
| Model | AT-HD4-V40SRS |
| HDMI Version | 1.4 |
| HDCP Support | Yes |
| HDMI Bandwidth | 10.2 Gbps |
| Ethernet | No |
| PoE | No |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Type | HDMI Extender |
| Input Ports | HDMI |
| Input Resolution | Up to 4K@30Hz |
| Output Resolution | Up to 4K@30Hz |
| Transmission Distance | 40 m (130 ft) @ 4K/UHD |
| HDBaseT Distance | 40 m (130 ft) @ 4K/UHD |
| Maximum Transmission Distance | 100m (328ft) over Cat6 |
| Power Supply | 5V DC |
| Operating Temperature | 0°C to 40°C |
| Relative Humidity | 20% to 90% (non-condensing) |
Describes the MODE dial, HDMI IN, IR Receiver, and IR Blaster sockets on the TX module.
Explains the EQ rotary control, HDMI OUT, IR Receiver, and IR Blaster sockets on the RX module.
Provides a step-by-step guide for connecting sources, displays, IR components, and cables.
Details the process for learning EDID from a connected display to the TX module.
Illustrates the physical connections between the DVD player, transmitter, receiver, and HDTV.
Offers solutions for common problems like no signal, 2D display issues, and AVR connectivity.
Outlines precautions to reduce the risk of electric shock, fire, and damage to the unit.
Details warnings against unauthorized modifications, using correct power supplies, and handling the device.
To Next Page
