Atlona AT-HDVS-150-TX Update Instructions

1
Atlona Technical Support: +1 877.536.3976 option 1
Update Instructions
AT-HDVS-150-TX / TX-PSK
The following procedure is used for both the AT-HDVS-150-TX and the AT-HDVS-150-TX-PSK. The rmware le for
the AT-HDVS-150-TX is used for both models.
Requirements
• AT-HDVS-150-TX or AT-HDVS-150-TX-PSK
• Firmware le: AT-HDVS-150-TX_[version].bin
• USB Type A to Mini-USB Type B cable
• Computer with USB port
1. Download the latest rmware from the Atlona web site.
2. Disconnect the power to the AT-HDVS-150-TX by disconnecting the Ethernet cable from the HDBaseT OUT port
on the AT-HDVS-150-TX.
3. Press and hold the DISPLAY ON/OFF button.
4. While pressing the DISPLAY ON/OFF button, connect the USB cable from the computer to the FW port on the
AT-HDVS-150-TX. When the USB cable is connected, the PWR LED indicator will glow solid green.
5. After a few seconds, a folder with the name USB UPDATER, will be displayed. Release the DISPLAY ON/OFF
button.
FW port

Atlona AT-HDVS-150-TX Specifications

General

Video Output	1 x HDBaseT
Power over Ethernet (PoE)	Yes
Control	RS-232, IR
HDMI Input	1
HDBaseT Output	1
3D Support	Yes
HDCP Compliance	Yes
Video Input	HDMI
Audio Input	HDMI
Operating Temperature	0 to 40 °C
Storage Temperature	-4°F to 140°F (-20 to 60°C)
Humidity	20–90% RH, non-condensing