Three-Input Switcher for
HDMI and VGA Inputs with
HDBaseT Output
The Atlona AT-HDVS-150-TX-PSK is a 3×1 switcher with two HDMI inputs, a VGA input with audio,
and an HDBaseT™ output. Video signals up to 1080p, plus embedded audio and control can be
transmitted up to 230 feet (70 meters), and up to 130 feet (40 meters) for 4K/UHD video @ 60 Hz
with 4:2:0 chroma subsampling. The AT-HDVS-150-TX-PSK is identical to the AT-HDVS-150-TX,
with the addition of local powering capability and an external power supply. This makes it ideal
for extending AV and control directly to a projector with an HDBaseT input. The AT-HDVS-150-
TX-PSK can serve as the central component of a small, automated AV system through automatic
input selection, and by sending RS-232 control commands to the projector. With automatic display
control capability, the AT-HDVS-150-TX-PSK can power the projector on or off whenever a source
is connected or disconnected from the unit.
• 1 x AT-HDVS-150-TX
• 1 x 48V power supply
• 1 x Captive screw connector
3 pin: RS-232
• 1 x Pair of mounting brackets
• 1 x Installation Guide
Package Contents
AT-HDVS-150-TX-PSK Installation Guide
Please check http://www.atlona.com/product/AT-HDVS-150-
TX-PSK for the most recent firmware update or manual.
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
To Next Page
Need help?
General
