EasyManua.ls Logo

Atmos DC 32 S - Page 2

Atmos DC 32 S
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WE WISH YOU ARE SATISFIED WITH OUR PRODUCT
AND THEREFORE WE RECOMMEND YOU TO KEEP
THE BELOW MENTIONED PRINCIPLES THAT ARE
IMPORTANT FOR THE LONG LIFE AND CORRECT
FUNCTION OF THE BOILER.
1. The used wood must be dry – max. 12 - 20 % of moisture – 2 years old.
2. During the gasification process the tars and acid condesates are produced. There-
fore it is necessary to install Laddomat 21 behind the boiler in order to
keep the temperature of the water returning to the boiler not lower than
65 °C.
Operating temperature in the boiler should be 80 - 90 °C.
3. If the boiler is fitted with a circulating pump, the running of the pump must be
secured via a separate thermostat to ensure the minimal specified temperature of
the returning water.
4. The rated boiler capacity ensures its environmental friendly operation.
5. Therefore we recommend the installation of the boiler together with accumulating
tanks and Laddomat. This ensures lower fuel consumption (20 30 %) and longer
durability of boiler and chimney connected with more comfortable boiler
attendance.
6. If the boiler is operated at a derated power (water heating in the summer) a daily
firing-up is necessary.
7. The checking firing-up and the operational training must be carried out by a profes-
sional assembling company.
1
CAUTION! If the boiler is fitted with water accumulation tanks and Laddomat 21
(see the enclosed diagrams), the guarantee period of the boiler body is extended
from 12 to 36 months. In case of non-observance of these principles the boiler
body life and the durability of the ceramics shaped pieces will be reduced because
of low-temperature corrosion.

Table of Contents

Related product manuals