Atomberg RENESA SMART +

To Next Page

Atomberg Technologies Pvt Ltd

Corporate ofﬁce:

Rupa Solitaire, Ofﬁce No. 1205, Millenium Business Park, Mahape, Navi Mumbai 400 710.

Maharashtra, India W: www.atomberg.com

Manufacturing unit

Plot No D-130 B, TTC Industrial Area, Shirawane, Navi Mumbai 400 706.

Ok Google

works with

Google is a trademark of Google LLC.

MAINTENANCE

Periodic cleaning of your ceiling fan is the only maintenance needed.

When cleaning, use only a soft lint-free cloth or a brush to avoid scratching the smooth

paint ﬁnish. You can use a moist cloth to remove stains if required. However, do not use

water directly. Abrasive cleaning agents are not required and should be avoided to prevent

damage to the outer ﬁnishing.

WARNING

• Do not use water when cleaning your ceiling fan. It could damage the motor by

causing a short-circuit and create the possibility of an electrical shock.

• Do not bend the blades while cleaning. A bend in the blade may result in unstable ﬁxing

and affect air delivery.

CEILING FAN

RENESA SMART

INSTRUCTION

MANUAL

IMPORTANT NOTE:

Read this manual carefully before installing or operating your

new Atomberg RENESA SMART+ Ceiling Fan. Ensure you save

this manual for future reference.

IOT enabled

Works with

App

Problem Cause Solution

Restart/speed Regulator is not bypassed Make sure the regulator is

variation eliminated from the connection

Blades have wrong sweep Check the sweep of the blades

with the fan sweep before

assembling

Need help?

Do you have a question about the Atomberg RENESA SMART + and is the answer not in the manual?

Summary

INSTRUCTION MANUAL

IMPORTANT NOTE

Read manual carefully before installing or operating the fan. Save for future reference.

INSTALLATION

Assembly

Steps for assembling the fan components including motor, down rod, and shackle kit.

Mandatory Step

Bypass or eliminate the regulator before installing for optimal fan performance.

ELECTRICAL WIRING INSTRUCTIONS

CONTROLLING THE FANS SPEED WITHOUT THE REMOTE

This document is an instruction manual for the Atomberg RENESA SMART+ Ceiling Fan, a super-efficient ceiling fan designed for residential and commercial use.

Function Description:

The Atomberg RENESA SMART+ Ceiling Fan is a modern ceiling fan that utilizes a super-efficient BLDC motor technology to provide superior air delivery while consuming significantly less energy compared to traditional induction fans. It is designed to be India's most energy-efficient ceiling fan, offering over 65% energy savings. The fan is equipped with smart features, including remote control operation, IoT capabilities, and compatibility with voice assistants like Amazon Alexa and Google Assistant. It offers consistent speed even at low voltages and runs up to three times longer on an inverter, making it suitable for areas with frequent power outages. The fan also incorporates a smart sensorless algorithm for greater reliability and does not heat up even after long hours of runtime, contributing to an extended lifespan.

Important Technical Specifications:

Motor Technology: Super-efficient BLDC motor.
Power Consumption: Approximately 28 watts at full speed (compared to 75 watts for ordinary induction fans).
Bearing: Full copper motor with double ball-bearing for stability and longevity.
Body and Blades: Aluminum body and blades for zero rust.
Parts and Accessories: Zinc-plated for rust-free operation.
Electronics Protection: Protective coating over electronics for enhanced resistance against moisture.
Control: Smart remote control, Atomberg App, Amazon Alexa, Google Assistant, and main switch control.

Usage Features:

The RENESA SMART+ Ceiling Fan offers a variety of usage features designed for convenience and energy saving:

Remote Control: The fan comes with an ergonomically designed remote control with soft, long-lasting buttons. It includes controls for ON/OFF, speed adjustment (Speed 1 to 5), Boost Mode, Sleep Mode, LED control, and Timer Mode.
Speed Control: Users can select from five different speed settings.
Boost Mode: Provides maximum air delivery when extra cooling is needed.
Sleep Mode: Automatically reduces fan speed by one level every two hours for four hours, then maintains a reduced constant speed (not below Speed 1), contributing to energy savings and comfort during the night.
Timer Mode: Allows users to set the fan to automatically switch OFF or ON after a preset duration (1, 2, 3, or 6 hours), further saving energy.
LED Indicator: The fan features LED indications for remote use and to show the selected speed or mode.
IoT Enabled: The fan can be controlled via the Atomberg App and is compatible with Amazon Alexa and Google Assistant, allowing for voice control and smart home integration.
Main Switch Control: The fan's speed can also be controlled by repeatedly toggling the main switch OFF and ON, with specific sequences corresponding to different speeds (Speed 1 to 5 and Boost Mode).
Regulator Bypass: It is mandatory to bypass or eliminate the traditional fan regulator from the connection for optimal performance, as the fan is controlled by its remote and smart features. Connecting a regulator can lead to speed variations and reduced performance.
Safety Features: The fan includes safety instructions such as ensuring secure blade fastening, proper clearance from ceiling and objects, and correct electrical wiring by a qualified electrician to prevent injury or damage.

Maintenance Features:

The RENESA SMART+ Ceiling Fan is designed for easy maintenance:

Periodic Cleaning: Only periodic cleaning is required.
Cleaning Method: Use a soft, lint-free cloth or a brush to avoid scratching the smooth paint finish. A moist cloth can be used for stains, but direct water application should be avoided.
Avoid Abrasive Cleaners: Abrasive cleaning agents are not required and should be avoided to prevent damage to the outer finishing.
Blade Care: Do not bend the blades while cleaning, as this can lead to unstable fixing and affect air delivery. Ensure blades are properly fastened and balanced to prevent wobbling and noise.
Rust-Free Design: The aluminum body and blades, along with zinc-plated parts, contribute to a rust-free design, reducing the need for extensive maintenance related to corrosion.
Troubleshooting Guide: The manual provides a comprehensive troubleshooting section to address common issues like the fan not starting, making noises, or wobbling, offering solutions or advising to contact service personnel.