Atomic Aquatics TFX - Cold Water Use; DIN

76
WARNING
COLD WATER USE
For diving in extreme cold waters below 50°F (10°C), we recommend having the rst
stage sealed with the installation of the optional anti-freeze kit (standard in TFX,T3, T2x,
ST1 & M1). This is a rubber sleeve that ts over the ambient chamber ports of the rst
stage to prevent icing of the rst stage. This is a factory or dealer installed item, as it
requires special tools and disassembly of the rst stage for lling of the chamber with a
special low temperature lubricant.
DIN CONNECTIONS
For use with cylinders having DIN style
valves (typically at pressures above 3000 psi),
a 300 BAR DIN connection is available.
It replaces the yoke connection and can
be ordered as standard from the factory or
as an option installed by the dealer.
TFX with DIN
Connection
You now own one of the nest and most unique regulators available. . . regardless of price. The TFX
forges a new Titanium standard as our signature regulator, providing you unprecedented reliability
and performance.
The TFX name refers to Titanium Front Exhaust. This diers from conventional second stages
which are congured with an exhalation diaphragm in the front and an exhaust valve in the rear.
The placement of the inhalation diaphragm and exhaust valve centered in the front of the regulator
oers some unique advantages for improved breathing and dryness.
The front exhaust in not a new concept. Developed over 40 years ago, we have taken a fresh look
at this unconventional design to bring you the ultimate "connoisseurs" breathing regulator with a
natural and sophisticated air delivery. The TFX includes many of the iconic features and specialty
materials found in all Atomic Aquatics regulators.
ATOMIC AQUATICS TFX