Atomic AMZ SERIES - Attaching bulkheads; Ball differential

1.9x4KB(Silver)
2x4KM
x8
x3
Bulkhead B (+0)
Bulkhead A (+0)
1
1
2
Apply Thrust
Bearing Grease
oil
Polish the diff plate and thrust
bearing plate with #1500 sand
paper
2.38mm
Thrust Ball
Diff Housing (Short)
Diff Housing (Long)
27T Pulley
Diff rubber
Diff Scwer
Pulley Collar
Diff Nut
Build 2 sets
2
Loosen
Tighten
After assembly
Diff tool
Ball differential
Attaching bulkheads
P.1
Apply Grease
Apply Ball Diff
Grease
M1.9x4KB (silver color)
M1.9x4KB (silver color)
2x4KM
2x4KM
Bulkhead B (+0)
Bulkhead A (+0)
Bulkhead B (+0)
Bulkhead A (+0)
Motor Mount
Spur gear shaft
Lower deck