Atomic BZ3 - User Manual

BZ3 Instruction manual
1
1

Summary

Step 1 - Diff Assembly

Step 1 - Prepare the Diff Lock Nut

Hold Diff Lock Nut by pliers and thread the diff screw into it before assembling the Ball Diff.

Step 1.1 - Diff Assembly

Insert the diff screw and rubber pressure collar into the diff cup.

Step 1.2 - Diff Assembly

Step 1.3 - Diff Assembly

Step 1.4 - Ball Diff Thrust Bearing

Step 1.4 - Ball Diff Assemble Finished

Step 2.0 - Motor Mount

Step 3.0 - Bulkheads

Step 4.0 - Belt and Ball Diff

Step 5.0 - Fixing Belts

Step 6.0 - Upper Bulkheads

Step 7.0 - Steering Crank

Step 8.0 - Steering Crank Support

Step 9.0 - Steering Linkages

Step 10 - Servo Mount

Step 11 - Front Upper Arms

Step 11.1 - Front Upper Arms

Install front upper arms using M2*2.5 set screws and adjust caster angle with washers.

Step 12 - Rear Upper Arms

Step 13 - Rear Lower Arms

Step 14 - Rear Uprights

Step 15 - Front Knuckles

Step 16 - Spur Gear

Step 17 - Upper Deck

Step 18 - Shocks

Step 18.1 - Front Shocks

Mount the front shocks using M2x4 screws and 4.0mm ball heads.

Step 18.2 - Rear Shocks

Mount the rear shocks using M2x4 and M2x6 screws with 4.0mm ball heads.

Step 19 - Body Mounts

Step 19 - Body Mounts Installation

Install the body mounts, trimming the front mount if necessary to avoid interference with the front belt.

Step 20 - Gear Ratio

Atomic BZ3 Specifications

General

Brand	Atomic
Model	BZ3
Category	Motorized Toy Car
Language	English