Need help?Do you have a question about the Atomic AMZ SERIES and is the answer not in the manual?
Assembly of the differential unit, requiring polishing and grease application.
Installation of the front differential, drive belt, and pulleys.
Mounting the steering assembly, including servo horn and linkage.
Installation of the motor, spur gear, and pinion, including gear ratio.
Mounting the front suspension arms and camber adjustments.
Connecting tie rods for steering linkage and alignment adjustments.
Installation and setup of the shock absorbers with specified grease.
Mounting the front body support structure and ensuring clearance.
General| Battery Type | LiPo |
|---|---|
| Controller Type | 2.4GHz Radio |
| Tire Material | Rubber |
| Drivetrain | AWD |
| Drive Type | Shaft drive |
To Next Page
