Atomic BZ3 - Step 14 - Rear Uprights

BZ3 Instruction manual
17
17
3 x 6 x 2 Bearing
3.5 Ball Head
Camber link Collar
3 x 6 x 2 Bearing
3.0 x 4.0 x 0.1 washer
Short CVD
2.0*7 pin
Pin cover
Caution:
Apply 0.1mm washer 2 or 3 pcs (around
0.3mm), to minimize the play of the CVD and
bearing.
Step 14 – Rear Uprights