ATOMRC Dolphin - KIT Lite Installation; Install Standoffs and Nuts; Glue GoPro Mount Plate and Fuselage; Install Battery Strap and Mount Board

KITLiteInstallation/KITLite安装指南
Install the standoff and nuts, need glue the nylon screw under the board.
安装机舱螺⺟及螺丝，机舱⽊⽚底部螺丝需先⽤胶⽔固定。
Glue the gopro mount plate, then glue the fuselage.
Install the battery strap , glue the battery mount board to the fuselage.
Install the Camera mount plate, and the V taill.
4
1
4
2
3
粘接GOPRO安装⽊板，然后粘接上下机身。
安装电池固定⽊⽚，安装舱盖扣。
安装机头相机安装⽚，粘接V尾。