ATOMRC Dolphin - KIT;PNP;FPV Installation; Adjust Balance with GoPro Installed; Secure GoPro and Install Hatch; Install Nose and Camera

7
5
When Gopro is installed, adjust battery slider to adjust balance.
安装Gopro时，需要将电池安装到后⾯，通过滑块调平。
To install Gopro, use rubber band to lock the gopro then install the hatch.
若安装GOPRO，需⽤橡⽪筋固定住GOPRO，然后盖上机头相机盖。
6
7
The CG is marked under the wing, you can move
the CG 3-4mm to get better control.
海豚的重⼼点、标记在机翼底部，
默认更适合新⼿更易起⻜，在默认重⼼点完成⾸⻜后，
你可将重⼼点往前移3~4mm，从⽽获得更好的⼿感。
CG CG
Install the Nose and Cam.
安装摄像头机头。
8