ATOMSTACK R2 User Manual

5
Use LightBurn
1. Add "Enable Rota" to main window
1.1 Click "Settings" on the toolbar
1.2 In the settings window, turn on the "Show rota enable on main window" button, and click OK.
Show rota enable on main window
Enable Rota

ATOMSTACK R2 Specifications

General

Brand	ATOMSTACK
Model	R2
Category	Industrial Equipment
Language	English

Summary

R2 Roller Installation Guide

Step 1: Roller Assembly

Installation guide for the roller component, detailing its placement and main parts.

Step 2: Gear Selection

Guidance on selecting appropriate gears based on engraved item specifications for optimal performance.

Step 3: Gear and Belt Adjustment

Instructions for adjusting gears, motor, and bracket for proper belt tension and positioning.

Step 4: Wiring Instructions

Detailed instructions for connecting the roller kit to the engraving machine via provided cables.

Using LightBurn Software

Enable Rotary Function

Steps to enable the rotary function within the LightBurn software's main interface.

Configure Rotary Setup

Configuring rotary parameters such as roller type, axis, and object dimensions in LightBurn.

Engraving Workflow

Importing designs, setting pattern size, engraving power, speed, and previewing the job.