Why is the internal temperature of my Atosa Cooling boxes too high?
If the internal temperature of your Atosa Cooling box is too high and the compressor isn't stopping, it could be due to several reasons: * Poor ventilation or high ambient temperature: Improve ventilation around the unit and lower the room temperature. * Too much warm food: Remove some of the food. * Frequent door openings: Reduce how often and how long you open the door.
What to do if my Atosa Cooling boxes compressor has a buzz sound?
If your Atosa Cooling boxes compressor is operating abnormally or making a buzzing sound, it's likely that the power voltage is outside of the rated range. Immediately disconnect the power supply and reconnect it once the voltage returns to normal. If you have frequent power issues, consider using a voltage stabilizer.
How to reduce the noise from Atosa CTD-3?
If your Atosa Cooling boxes are making too much noise, here are a few possible solutions: 1. **Level the unit:** Adjust the adjustable feet to ensure the unit is level. 2. **Tighten fasteners:** Check for and tighten any loose fasteners on the unit. 3. **Separate pipes:** Ensure that pipes are not touching the compressor; carefully separate them if they are.
General| Model | CTD-3 |
|---|---|
| Shelves | 2 |
| Doors | 1 |
| Power Supply | 115V, 60Hz |
| Voltage | 115V |
Excludes consequential damages, economic loss, profit loss, and is non-transferable.
Covers power connection, cord handling, socket use, water splashing, hazardous goods, and flammable sprays.
Advises on minimum restart time after shutdown, avoiding cord obstruction, and not drilling the casing.
Specifies that the unit is not suitable for storing pharmaceutical products.
Highlights that the unit is unsuitable for storing blood, pharmaceutical products, and biological products.
Warns against placing heavy articles on top and dismantling the unit without authorization.
Addresses issues like no power, abnormal compressor operation, and recommends checking connections and voltage.
Covers compressor running long without frost, excessive frost, and low internal temperature.
Troubleshoots high internal temperature, compressor not stopping, and excessive noise.
To Next Page