7.
lnstallatlon procedure
.A.
Place the refrigerator in the coolest and
best ventilated part
of
the room. Don' t install
the refrigerator in the near
of
heat and direct
sunlight sources .
.A.
Remove the straps securing the cardboard packing
Remove the cardboard. Covering
Remove the PET protection film
.A.
Clean the refrigerator with mild detergent
and then
dry
it with a soft cloth.
8.
Connecting
to
the
main
power
supply
(ff\
This operation must be carried
out
by
\Ji)
professionally and qualified persons.
The refrigerator are supplied complete with a
power supply cable
for
the connection
to
the
main power supply. A thermomagnetic circuit
breaker (not supplied) must
be
installed
between the mains power point and the power
supply cable
of
the refrigerator.
0
a
Before proceeding
make
sure that=
.A.
the
mains voltage corresponds
to
the
voltage on
the refrigerator 115V/60Hz/1 Ph;
to
ensure
proper operation it is essential
for
the
power supply voltage
to
come within a
range
of
+/- 10%
of
the unit's rated voltage
NO
u
To Next Page
Loading...