Need help?Do you have a question about the ATS GDS Series and is the answer not in the manual?
Covers essential safety precautions, electrical hazards, UV light exposure, maintenance safety, and proper usage guidelines.
Explains the unit's purpose, its germicidal action, and the physical components and design of the GDS series.
Provides essential considerations for installing the UV disinfection units, including water temperature and pressure limits.
Outlines critical safety precautions to be observed during installation and servicing of UV units.
Detailed instructions for the physical installation of the UV disinfection system.
Details the operational status monitoring system and the UV lamp monitoring technology.
Step-by-step guide for installing and starting up the UV lamp and system, including timer reset.
Explains the various alarm indicators and their meanings for the UV system.
Provides detailed steps for disinfecting water systems, including wells and pipelines, using chlorine.
Details EPA registration, large wells, springs, and cisterns disinfection methods.
Guidance on optimal chlorine levels, safe usage, and water supply safety reminders.
Specific procedure for sanitizing plumbing lines when installing a UV system.
Instructions for installing, cleaning, and maintaining the quartz sleeve, including replacement recommendations.
Procedures for installing UV lamps and guidelines for their maintenance and replacement.
Covers electrical connections, grounding, and voltage considerations for the UV unit.
Provides a step-by-step guide for collecting sterile water samples for laboratory testing.
Details the limited warranty terms, periods, and exclusions for the UV disinfection system.
Specifies warranty durations for components and lists situations where the warranty is void.
Covers ATS's liability limitations and procedures for product returns and warranty claims.
Covers essential safety precautions, electrical hazards, UV light exposure, maintenance safety, and proper usage guidelines.
Explains the unit's purpose, its germicidal action, and the physical components and design of the GDS series.
Provides essential considerations for installing the UV disinfection units, including water temperature and pressure limits.
Outlines critical safety precautions to be observed during installation and servicing of UV units.
Detailed instructions for the physical installation of the UV disinfection system.
Details the operational status monitoring system and the UV lamp monitoring technology.
Step-by-step guide for installing and starting up the UV lamp and system, including timer reset.
Explains the various alarm indicators and their meanings for the UV system.
Provides detailed steps for disinfecting water systems, including wells and pipelines, using chlorine.
Details EPA registration, large wells, springs, and cisterns disinfection methods.
Guidance on optimal chlorine levels, safe usage, and water supply safety reminders.
Specific procedure for sanitizing plumbing lines when installing a UV system.
Instructions for installing, cleaning, and maintaining the quartz sleeve, including replacement recommendations.
Procedures for installing UV lamps and guidelines for their maintenance and replacement.
Covers electrical connections, grounding, and voltage considerations for the UV unit.
Provides a step-by-step guide for collecting sterile water samples for laboratory testing.
Details the limited warranty terms, periods, and exclusions for the UV disinfection system.
Specifies warranty durations for components and lists situations where the warranty is void.
Covers ATS's liability limitations and procedures for product returns and warranty claims.
General| Brand | ATS |
|---|---|
| Model | GDS Series |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
