ATS GDS-8 - User Manual

Dealer Info:
Installation, Operation and
Maintenance Manual
CAUTION: Read and Follow all safety rules and
operating instructions before first use of product.
Ultraviolet Disinfection Systems
M
odels:
GDS-8
GDS-12
GDS-20

Summary

General Safety Instructions

Safety Compliance & General Precautions

Emphasizes adherence to all instructions and general safety rules for system operation.

Electrical & Equipment Hazards

Covers risks of electric shock, damaged equipment, and safe procedures for unplugging the unit.

Usage, Environment & UV Lamp Safety

Details proper use, environmental considerations, UV lamp hazards, and replacement needs.

Function and Description

Installation Procedures

General Installation Considerations

General Precautions During Installation

Step-by-Step Installation Guide

Detailed steps for plumbing connections, mounting the unit, and initial system checks.

Electronic Controls and Startup

System Overview & Operation

UV Lamp Control Startup

Procedures for lamp insertion, connection, and initial power-up sequence.

Lamp Reset and Alarm Conditions

How to reset the lamp timer and interpret various alarm indicators.

Sanitation Procedures

Disinfecting Water Systems

Disinfection Procedure Steps

Sanitation Procedure Continued

Chlorine Dosage Guidelines

Maintenance

Quartz Sleeve Maintenance

UV Lamp Maintenance

UV lamp installation, lifespan, maintenance, and replacement guidance.

Troubleshooting Guide

UV Lamp Illumination Issues

Causes and corrections for the UV lamp not lighting.

Leak at Quartz Nipple

Specifications

Manufacturers Limited Warranty

Warranty Periods

ATS GDS-8 Specifications

General

Type	Gas Detection System
Model	GDS-8
Channels	8
Power Supply	24 VDC
Detection Gases	Combustible gases, Toxic gases, Oxygen
Sensor Types	Electrochemical, Catalytic Bead, Infrared
Outputs	4-20mA, Modbus RTU, Relays
Operating Temperature	-20°C to +50°C