Need help?Do you have a question about the ATS 570 and is the answer not in the manual?
Explains the dead zone test, its purpose, and the testing procedure.
Measures vertical distances along the sound beam axis to ensure accurate size and depth representation.
Measures horizontal distances perpendicular to the sound beam for accurate size and volume assessment.
Assesses the minimum reflector separation for imaging objects along and perpendicular to the sound beam.
Identifies the region of greatest intensity and lateral resolution for optimal diagnostic information.
Evaluates the system's ability to detect weak echoes from small objects at specified depths.
Assesses the phantom's ability to detect and display non-echogenic target structures accurately.
Measures how well the system displays echo amplitudes as varying brightness levels.
Explains the dead zone test, its purpose, and the testing procedure.
Measures vertical distances along the sound beam axis to ensure accurate size and depth representation.
Measures horizontal distances perpendicular to the sound beam for accurate size and volume assessment.
Assesses the minimum reflector separation for imaging objects along and perpendicular to the sound beam.
Identifies the region of greatest intensity and lateral resolution for optimal diagnostic information.
Evaluates the system's ability to detect weak echoes from small objects at specified depths.
Assesses the phantom's ability to detect and display non-echogenic target structures accurately.
Measures how well the system displays echo amplitudes as varying brightness levels.
General| Model | ATS 570 |
|---|---|
| Category | Laboratory Equipment |
| Accuracy | ± 0.1 % |
| Power Supply | 100-240 V, 50/60 Hz |
| Dosing Volume | 0.001 mL - 50 mL |
| Connectivity | USB, RS232 |
| Resolution | 0.001 mL |
To Next Page
