Need help?Do you have a question about the aTTo Digital PoweREC and is the answer not in the manual?
General| Internal Memory | 8 GB |
|---|---|
| Connectivity | USB |
| Recording Format | MP3 |
| Microphone Type | Built-in, omnidirectional |
| Playback Options | Built-in speaker |
Connect the recorder to a USB power source. Blue indicator flashes during charging, showing battery level.
Edit the time.txt file on the computer to set the recorder's date and time for file stamping.
Push the RECORDING ON/OFF button to ON. The device starts recording in the last used mode.
Push the "Recording on/off" button to OFF. The green indicator light turns red and goes out.
Connect recorder to USB, ensure switch is OFF, open drive, find RECORD folder, and play audio files.
Connect your phone or tablet to the USB output to charge it on the go.
Short press the Power Bank Button to check the battery level via the blue LEDs.
When recording is off, use the 8GB memory to copy and store files as a removable disk.
Use the included OTG cable to access the recorder's memory directly from your smartphone.
Green light indicates recording mode; blinking means memory full or low power.
Guidance on device not recognized, not charging, or full memory issues.
Tips on using free audio editors like Audacity to remove background noise.
Lists the USB cable and OTG cable/Micro USB provided with the device.
Details size, weight, power supply, battery life, recording format, capacity, and support system.
To Next Page
