1. DO NOT – Operate the mower without all the correct guards fitted.
2. DO NOT – Alter engine settings unless stated by Engine manufacturer.
3. DO NOT – Touch any moving or rotating parts, during working conditions
4. DO NOT – Stop the engine immediately after heavy use, (See section 5.6)
5. DO NOT – Operate the mower without suitable ear and eye protection
6. DO NOT – Allow passengers.
7. DO NOT – Leave machine un-attended while operating
8. DO NOT – Run the engine in an enclosed area, exhaust gases contain Carbon Monoxide
and are fatal if inhaled.
9. DO NOT – Operate the mower on excessively steep slopes.
10. . DO NOT – Operate the mower unless all safety features are fitted to the mower
and are used correctly
11. . DO NOT – Operate the mower until you have read and understood the entire
operators manual
12. . DO NOT – Wear loose fitting clothing, to avoid catching on parts of the
machine
13. . DO NOT – Try to remove blockages while the engine is running. Ensure engine
is stopped and the rotor has finished rotating, before any servicing takes place
to your mower.
14. . DO NOT – Operate the mower in Dark conditions unless suitable artificial
light is used.
15. . DO NOT – Operate if excessive vibration occurs, stop the machine immediately
and view maintenance chart.
16. . DO NOT – Climb on the mower.
1. DO – Follow Engine manufactures guideline.
2. DO – Ensure all spectators are a safe distance away when operating.
3. DO – Carry out regular servicing and checks before use.
4. DO – Clear cutting area from potential damaging components.
5. DO – Reduce speeds when working on hillsides or rough terrain
6. DO – Be aware components can be hot after operation
7. DO – Follow any towing guidelines stated by ATV manufacturer.
8. DO – Show some caution when filling the tank with petrol, especially if engine
components are hot.
9. DO – Ensure all safety decals are in good condition, replace any that are damaged.
10. DO – Keep hands and feet away from rotating blades
11. DO – Ensure mower is in transport position before transporting from workplace.
To Next Page
Loading...
