8
In The Interest Of Safety - Do
1) DO - Follow Engine manufactures guideline.
2) DO - Ensure all spectators are a safe distance away when operating.
3) DO - Carry out regular servicing and checks before use.
4) DO - Clear cutting area from potential damaging components.
5) DO - Reduce speeds when working on hillsides or rough terrain
6) DO - Be aware components can be hot after operation
7) DO - Follow any towing guidelines stated by ATV manufacturer.
8) DO - Show some caution when filling the tank with petrol, especially if engine components
are hot.
9) DO - Ensure all safety decals are in good condition, replace any that are damaged.
10) DO - Keep hands and feet away from rotating blades
To Next Page
