- 11 -
Tire inflating pressure
It is very important to keep the tire in proper pressure and check the tire pressure before use.
The inflating should be done while the tire is cold.
Tire maintenance
Tire tread depth should be checked regularly.( Shallower tread means less grip of tire). You
must stop to use the vehicle if the tire is pierced, disassemble the tire and check it carefully.
Tire maintenance should be done by an authorized technician. Tire should be replaced
immediately when it is distorted or damaged.
Tire replacement
It is important to use the correct size and standard tire as per our specification (see details in
technical specification sheet)
Don’t use the used tire if you are not sure its previous service condition.
Tire aging
Tire aging is unavoidable even the tire is not ever used or just used a few times. Tire aging is
mainly reflected in the cracked section on side of tire and tire tread, sometimes the tire is
distorted as well. The used and aged tire should be checked and confirmed if it is ok to use
again by an authorized technician
HANDLE DRIVE CONTROLS
1. rear brake lever 2.horn button switch
3. twist button of Forward)- Off- Reverse 4. Ignition key switch
5. battery volume gauge 6. front brake lever
7. accelerator grip with ON/OFF lamp switch.
Remark: Accelerator works while the KEY SWITCH in at ON position and it does not
work while it is at OFF position
To Next Page
Loading...
