ATV MOW - 6 Maintenance; 6.1 Engine; 6.2 Excess Crop Build Up

12
Maintenance Schedule
Maintenance Operation:
Hourly
Daily
Weekly
Seasonal
Engine (See Engine Manufacturers Manual)
●
●
●
●
Remove Excess Crop Gathered on Deck
●
●
●
●
Remove Excess Crop Wrapped around
Rotor Ends
●
●
●
●
Visual Check to Ensure Nothings Loose
●
●
●
Grease Height Adjuster
●
●
●
Grease Rear Roller
●
●
●
Grease Rotor Bearings
●
●
●
Tyre Pressures
●
●
Drive Belt Inspection
●
●
Rotor Bearing Inspection
●
●
Wheel Bearing Inspection
●
●
Oil 50mm Coupling
●
●
Swivel Hitch Bush Wear
●
●
Check All Fasteners are Tight and Intact
●
●
Safety Chain Guard Inspection
●
●
Safety Decals Intact
●
●
Safety Guards Intact
●
●
Check Blade Wear / Condition
●
Check Metal Fatigue
●
Clutch Wear / Function
●
6.1 ENGINE
Refer to engine manufacturers manual, for servicing and maintenance of the engine.
6.2 EXCESS CROP BUILD UP
Remove all crop deposits from the deck, and engine area. Buildup of crop deposits could result in
heat build and fires Disconnect the spark plug lead. Remove any crop that is wrapped around the end
of the rotor (A) or on the underside of the deck. Raise the deck to its max height to assist access to
the rotor shaft.
MAINTENANCE
6
A