EasyManua.ls Logo

Aube Technologies TI034-3W - User Manual

Aube Technologies TI034-3W
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Trail Appliances Ltd.
APPLIANCE SERVICE AND
WARRANTY INFORMATION
How to Request Service
If you require service on your appliance, please call the service provider listed for your brand on the next page. To en-
able the Service Representative to better assist you, please have the following information ready:
Where to Find Model & Serial Numbers on Appliances
Range
Inside the oven drawer, on the frame surrounding the drawer cavity.
Refrigerator
Anywhere at eye level to the left or right of the door inside the refrigerator compartment.
Dishwasher
Either on the top of the outermost surface of the cavern or on one side, just inside the opening.
Ventilation
Hoodfan: On the underside of the hoodfan, near the back.
Microwave: On the inside of the microwave, on the lip of the microwave interior doorframe.
Laundry
Washer: On the interior rim of the door.
Dryer: On the interior rim of the door.
Please Note: Your new appliances come with a one year manufacturer’s warranty against defects in materials or
workmanship, unless otherwise specified in your product manuals. If your manufacturer’s warranty has expired, the
service call will be subject to a trip charge & any other applicable charges required to repair your appliance. If your
appliance is under the manufacturer’s warranty, but the service call is determined to be customer education, a trip
charge will be applicable. To avoid this, please read your use & care manual thoroughly prior to requesting service.
Landlords/Tenants: In a tenancy situation, any services provided must be under the direct authorization from the
Building Manager. If the tenant is booking service directly, they will be asked to provide a credit card number.
1. Builder Name: Marcon Project (397) Ltd
4. Model No. (See below for further instructions)
2. Builder Account No.: 53056DC
5. Serial No. (See below for further instructions)
3. Home Address: 6. Date of Possession:

Table of Contents

Questions and Answers

  • H
    hallveronicaJul 31, 2025
    What to do if programs do not run as expected on Aube Technologies Switch?
    • C
      Cassie AllisonJul 31, 2025
      If programs on your Aube Technologies Switch aren't running correctly, verify that the switch is properly programmed. Also, be aware that '- : - -' indicates an inactive program. If your switch is in 12-hour format, ensure that PM is displayed when programming for afternoon times.
  • J
    johnsonkyleAug 7, 2025
    What to do if the Aube Technologies Switch metal plate is hot?
    • J
      jeffreybergerAug 7, 2025
      It is normal for the metal plate of the Aube Technologies Switch to get hot when it is handling high loads, up to the maximum of 500 W.
  • B
    birdkaraAug 14, 2025
    What to do if Aube Technologies TI034-3W display is blank?
    • C
      Colin McneilAug 14, 2025
      If the display of your Aube Technologies Switch is blank: * Check the circuit breaker at the main panel. * Make sure the light bulb is not burned out. * Ensure the ON/OFF selector is set to ON. * Try resetting the switch using a paper clip.
  • J
    Jeremy AndrewsAug 22, 2025
    Why does Aube Technologies TI034-3W turn back on at midnight after being bypassed?
    • T
      tom34Aug 22, 2025
      Any temporary bypass on the Aube Technologies Switch is cancelled at midnight. The light turns back on to align with the programmed state for midnight. To prevent this, program P1 OFF to midnight or earlier to ensure the light remains off when you bypass programming.

Aube Technologies TI034-3W Specifications

General IconGeneral
ProgrammableYes
Voltage120/240 VAC
LoadResistive
DisplayLCD
ColorWhite
Current Rating15 A
MaterialPlastic
MountingWall
Wire Gauge14 AWG

Related product manuals