12. TECHNICAL FEATURES
Ý
Notice
Possible causes How to fix these problems
Water remains inside the
machine after the rinse cycle
= Clogged filters.
= Drain hose kinked or clogged.
= Clean all filters as described in this manual.
= Ensure that the drain hose is properly placed
and open.
Load capacity 12 place settings
Permissible water pressure 4.35 - 145 psi (0.3 - 10 bars)
Electrical connection 120 V (volts), 12 A (amps), 60 Hz (hertz)
Total power 1200 W (watts)
Heater power 1000 W (watts)
Because we continually strive to improve our products, we may change our specifications and design without
prior notice. This device corresponds to the following directives:
UL 749 Household Dishwasher directive.
25
To Next Page
Loading...
