Aube Technologies TI035 User Manual

3/6
NOTE: By default, once you have programmed the sunset/sunrise parameters, the timer will
follow the sunrise/sunset program when placed in Automatic mode. To set your own
schedule, see section 8.
Defining the sunset/sunrise parameters
Fill out the following table:
1) LATITUDE & LONGITUDE: Enter the coordinates of your city or the nearest city (see
last page). If none of the cities in the table is applicable, this information is usually
available on the internet.
NOTE: Add a minus sign when entering a south latitude coordinate or a west longitude
coordinate.
2) DAY #: Enter the day #. (Add the code of the current month to the current date.) For
example: For June 24th, the day # = 151 + 24 = 175
3) nor/Ad: If your country has daylight savings time, select the appropriate period.
4) Lc: If your city’s time zone is based on political or economic boundaries instead of its
coordinates, your lights might switch On/Off too early or too late with respect to sunrise
and sunset. Therefore, apply a correction factor (+1 or -1). Otherwise, leave it at 0.
Programming the sunset/sunrise parameters
Once you have defined the sunset/sunrise parameters, proceed as follows:
1) Press the CODE button until the desired parameter appears. The parameters appear in
the following order.
2) Press the HOUR or MIN button to modify the value (see table above for the buttons to
use).
3) Press one of the control buttons or close the switch door to return to normal operation.

Sunset/Sunrise Program
Latitude Longitude Day # nor/Ad Lc
January: 0 March: 59 May: 120 July: 181 September: 243 November: 304
February: 31 April: 90 June: 151 August: 212 October: 273 December: 334
nor Standard time / Normal time / Winter time
Ad Daylight savings time / Advanced time / Summer time
Parameter Defaulf setting Possible settings Buttons used
Latitude (LAT) 00 -65 to 65 HOUR & MIN
Longitude (LONG) 000 -180 to 180 HOUR & MIN
Day number (DAY #) 000 1 to 365 HOUR & MIN
Daylight savings time nor nor / Ad MIN
Local correction factor (Lc) 0 -1, 0, 1 MIN

Aube Technologies TI035 Specifications

General

Brand	Aube Technologies
Model	TI035
Category	Switch
Language	English