Need help?Do you have a question about the AUDAC ANI22 and is the answer not in the manual?
General| Type | Audio Network Interface |
|---|---|
| Inputs | 2 |
| Outputs | 2 |
| Sampling Rate | 48 kHz |
| Bit Depth | 24-bit |
| Connectivity | Ethernet |
| Power Supply | PoE (Power over Ethernet) |
| Channels | 2 |
| Network Protocol | Dante |
| Latency | 1 ms |
Detailed steps for physically installing the ANIxx Dante interface into the amplifier chassis and connecting its components.
Key technical data for the ANIxx, including network protocols, sampling rates, latency, power, and compatible amplifier series.
To Next Page
