Introduction
WaveDynamics™ Dante audio network interface
The ANIxx are Dante audio network interfaces for use with WaveDynamics™ supporting
amplifiers, supporting two (ANI22) or four (ANI44) networked audio channels. The
installation of this optional interfaces allows these amplifiers to be integrated into any DANTE
enabled AV network and flawlessly transfer digital audio with any compatible product on
the market, ranging from music sources to microphone systems, mixers, and many more.
These interfaces come delivered as a complete installation kit, including all required
accessories for installation into the WaveDynamics™ amplifier chassis.
INSTALLATION PRECAUTIONS
The installation of the ANI module may only be performed by
qualified technicians.
Incorrect installation can lead to permanent damage or incorrect
functioning of the equipment.
Packaging contents
- 1x ANIxx main interface board
- 1x ANIxx ethernet connection board
- 1x ANIxx ethernet connection cable
- Required installation accessories:
- 2x Nylon snap-in spacer
- 1x M3 spacer
- 1x Spring washer
- 1x M3 nut
- 2x Cable tie
- USB memory drive (containing software and instructions)
To Next Page
Loading...