AUDAC ANI22 - Technical Specifications; ANIxx Device Specifications

9
Additional information
Technical specifications
Number of inputs ANI22 2
ANI44 4
Number of outputs ANI22 2
ANI44 4
Communication Protocol Audinate DANTE
Sampling frequency 48 kHz
Sampling bit depth 24-bit
Latency 2 ~ 5 ms
Connection Ethercon compatible RJ45 connector
Network specification Standard 100 Mbit or 1 Gbit network
Mounting Integration in amplifier chassis
Power consumption 1.5 Watt
Weight 0.090 Kg
Compatible devices (implementation) ANI22 SMA Series WaveDynamics™ amplifiers
ANI44 SMQ Series WaveDynamics™ amplifiers
Protocol (DANTE) compatible devices https://www.audinate.com/products/dante-enabled