After the desired zones are activated, announcements can be made by pressing and holding
the ‘Push to talk’ button. When the databus is occupied by another paging station (orange LED
blinking), no announcements can be made.
Following actions take place when making an annoucements:
1) Selection of zones will be transmitted to the main unit and selected zones will be enabled.
2) Chime tone (if enabled) will be announced. (the orange led will blink during chime playback)
3) The microphone will switch on and the level will be indicated by the indicator LED’s.
Annoucements are best made with a distance of 5 cm between the user and microphone, at a
tone which results in illumination of the green (good) LED.
4) Release the ‘Push to talk’ button for terminating the announcement
To Next Page
Loading...