2
22
2
Warning
• Use only the correct amplifier output voltage and impedance, exceeding these limits could
cause fire or other failures.
• Avoid explosions: do not use the speaker around gasoline, thinner or other combustibles.
• Only install the speaker in locations that can structurally support the weight of the speaker.
Not doing this may result in the speaker falling down.
• Do not use any other method than specified to mount the speaker. If extreme force is applied
to the speaker, it could fall down.
• Attach a safety wire to the speaker when the speaker is mounted high above the ground.
Failure in doing so could cause the speaker to fall down for any reason.
• Avoid mounting the speaker in locations exposed to constant vibrations. The mounting points
can be damaged by excessive vibrations, potentially causing the speaker to fall down.
Caution
• Avoid electric shocks: switch off the amplifier power when connecting the speaker.
• Avoid installing the speaker in locations exposed to solvents, acids, smoke and heaters, as
excessive exposure to these factors could result in speaker failure, fire or electric shock.
• Do not operate the speaker for an extended period of time at distorted sound. This could
cause (irreparable) damage to the speaker.
• Do not stand or sit on, nor hang down from the speaker, as this may cause failure of the
speaker.
To Next Page
Loading...
Need help?
General
