Need help?Do you have a question about the AUDAC CS75 and is the answer not in the manual?
General| Impedance | 8Ω |
|---|---|
| Sensitivity | 88dB |
| Tweeter size | 1 inch |
| Type | 2-way |
| Woofer size | 6.5 inch |
Cut a hole in the ceiling with a diameter of 167 mm using the provided template for marking.
Connect the loudspeaker cable to the power tap connection block for 8 Ohm or 100 Volt applications.
Insert the speaker into the hole and tighten screws to rotate mounting clips outwards, securing it to the ceiling.
Assemble the front grill to the loudspeaker after mounting screws are tightened, using rubber pieces if needed for vibration.
To Next Page
