AUDAC MTX User Manual

1
MTX Commands User Manual
Index
Introduction 2
Input list 2
Output list 2
Using the commands 3
SVx Set Master Volume 4
SVU0x Set Master Volume Up 3dB 4
SVD0x Set Master Volume Down 3dB 4
SRx Set Routing 4
SRU0x Set Routing Up 5
SRD0x Set Routing Down 5
SB0x Set Bass 5
ST0x Set Treble 6
SM0x Set Mute 6
GVALL Get Volume info for all zones 6
GRALL Get Routing info for all zones 6
GMALL Get Mute info for all zones 7
GV0x Get Volume info for 1 zone 7
GR0x Get Routing info for 1 zone 7
GM0x Get Mute info for 1 zone 7
GB0x Get Bass info for 1 zone 7
GT0x Get Treble info for 1 zone 8
GZI0x Get Volume, Routing, Mute, Bass, Treble for 1 zone 8
SAVE SAVE settings 8
DEF Load factory settings 8
GSV Get Software Version 8

AUDAC MTX Specifications

General

Brand	AUDAC
Model	MTX
Category	Speakers
Language	English

Summary

Volume Control Commands

SVx

Sets the output volume for a specific zone to a desired level.

SVU0x

Increases the volume of a specified zone by 3dB.

SVD0x

Decreases the volume of a specified zone by 3dB.

Routing and Tone Commands

SRx

Sets the audio routing for a zone by selecting an input source.

SBOX

Sets the bass level for a specific zone.

STOx

Mute and Zone Information Commands

SMOx

System Settings Commands

SAVE

Saves the current zone settings, including routing, volume, bass, and treble.

DEF

Resets all zone and device settings to their factory defaults.

GSV